Wheel Tracker Small. The CRT-WTEN1 and CRT-WTEN2 are supplied with a UKAS certificate of accreditation validating conformance to EN 13108
Wheel tracking is used to assess the resistance to rutting of asphaltic materials under conditions which simulate the effect of traffic. A loaded wheel tracks a sample under specified conditions of load, speed and temperature while the development of the rut is monitored continuously during the test. Test specimens can be either slabs prepared with a laboratory compactor or 200mm Ø cores cut from the highway.
The CRT-WTEN1 wheel tracker performs both procedures A and B specified for the small scale device in EN 12697-22. Procedure A requires that six specimens are tested. For procedure B only two specimens need to be tested, but rut depth must be measured at more points along the longitudinal rut profile. To speed up the testing process the CRT-WTEN2 was designed to test two specimens simultaneously.
Standards
- EN 12697-22 Small device
- AGPT/T231 (supersedes AST 01)
- BS 598-110:1998
Key Features
- Tests materials for roads with axle loads up to 13 tonnes
- Rigid test frame built from extruded aluminium section
- Integral temperature controlled cabinet with double glazed doors
- PID control of test temperature in the range 40°C to 62°C
- Rack for pre-test temperature conditioning of specimens
- The CRT-WTEN2 tests two specimens simultaneously
- Specimens compacted with the Cooper Technology Roller
- Compactor can be transferred directly to the wheel tracker without de-moulding
- Closed-loop speed control
- User-friendly Windows™ software
- Supplied with certification of a UKAS accredited calibration
Key Use
- Determination of the rut resistance of asphaltic paving materials
Software
- User friendly, intuitive and reliable Windows™ software developed using LabVIEW™
- Software is designed to perform EN 12697-22 Small device
- Software automatically starts the wheel tracker, maintaining the speed at the specified 26.5 cycles per minute
- Measures rut depth and sample temperature automatically at regular intervals
- The rut profile is captured automatically by the software and analysed to calculate the rut depth
- A continuously updated on-screen graph shows rut depth versus time, along with the rut profile and temperature
- Software stops the wheel tracker on completion of a test and prints a test report if required
- Stored test data can be analysed and compared with other test data utilising a spreadsheet package
- Utilities are included for transducer check, diagnostic routines and RTD calibration
Wheel Tracker Small Specifications:
Wheel Load | 700/520N |
Mould Dimensions mm | 305 x 305mm (others available) |
Wheel Speed | 26.5 cycles per minute |
Slab Thickness mm ¹ | 40 to 100mm |
Rut Depth Transducer Range mm | 50 |
Temperature Range | 40 to 60°C |
Electrical Supply | Single 220-240 Volts 50/60 Hz @ 13A (others available) Dual 220-240 Volts 50/60 Hz @ 16A (others available) |
Compressed Air | Dual 7-10 bar @ 600 L/min |
Dimensions mm (W x D x H) | Single 1579 x 840 x 1740 Dual 1750 x 1090 x 1970 |
Working space required mm (WxDxH) | Single 1680 x 1840 x 1940 Dual 1850 x 3090 x 2070 |
Weight (approx.) Kg | Single 448 Dual 500 |
PC | Included |