ETM-D dual column floor standing (50~600kN)
The ETM type D Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems with rugged structure are suited for tension and/or compression applications with load range requirements from 50kN to 600kN. They are typically used for quality control and production testing.
Typical specimens: Metals, building components, large fasteners, composites, wood products
Environmental simulation: Environmental chamber and high temperature furnace
New Features:
- Robust guidance columns increase lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy
- Non-clutched drives, rated for full speed at maximum force
- Compact design saves lab space
- Wider test width
High Quality at affordable price
- Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies
- Fully-protected lead screw covers provide longer life and greater operator protection
- Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories
- High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller
- Photoelectrical encoder built in servo motor system is for position measurement of crosshead
- Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests
- Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards
- Remote control keypad facilitates test operation
- Full one-year warranty on parts and labor
- Free software upgrading
Machine dimensions: ETM504D ETM105D
|
Test space |
Frame type |
Width x Depth x Height A x B x C (mm) |
Crosshead travel H (mm) |
Test width W (mm) |
|
Single |
Standard |
1145×765×2340 |
1150 |
600 |
|
Extended frame |
1145×765×2640 |
1450 |
600 |
|
|
Dual space Upper compression lower tension |
Standard |
1145×765×2340 |
1050 |
600 |
|
Extended frame |
1145×765×2640 |
1350 |
600 |
|
|
Dual space Upper tension lower compression |
Standard |
1145×765×2340 |
1150 |
600 |
|
Extended frame |
1145×765×2640 |
1450 |
600 |
Machine dimensions: ETM205D ETM305D
|
Test space |
Frame type |
Width x Depth x Height A x B x C (mm) |
Crosshead travel H (mm) |
Test width W (mm) |
|
Single |
Standard |
1210×770×2600 |
1200 |
650 |
|
Extended frame |
1210×770×2900 |
1500 |
650 |
|
|
Dual space Upper compression lower tension |
Standard |
1210×770×2600 |
1150 |
650 |
|
Extended frame |
1210×770×2900 |
1450 |
650 |
|
|
Dual space Upper tension lower compression |
Standard |
1210×770×2600 |
1150 |
650 |
|
Extended frame |
1210×770×2900 |
1450 |
650 |
Machine dimensions: ETM505D ETM605D
|
Test space |
Frame type |
Width x Depth x Height A x B x C (mm) |
Crosshead travel H (mm) |
Test width W (mm) |
|
Dual space Upper compression lower tension |
Standard |
1535×1175×3000 |
1400 |
700 |
|
Extended frame |
1535×1175×3300 |
1700 |
700 |
Specifications:
|
Model |
ETM504 |
ETM105 |
ETM205 |
ETM305 |
ETM505 |
ETM605 |
|
Type |
Type D |
|||||
|
Capacity (kN) |
50 |
100 |
200 |
300 |
500 |
600 |
|
Calibration standard |
ISO 7500, Class 1 / Class 0.5 |
|||||
|
Force range |
0.2% ~ 100%FS / 0.4 ~ 100%FS |
|||||
|
Force accuracy |
±1.0% / ±0.5% of reading |
|||||
|
Force resolution |
1/500000FS |
|||||
|
Position accuracy |
±0.50% of reading |
|||||
|
Position resolution (μm) |
0.025 |
0.014 |
0.021 |
|||
|
Crosshead speed (mm/min) |
0.001 ~ 500 |
0.001 ~ 250 |
||||
|
Crosshead speed accuracy |
within ±1% / ±0.5% of set speed |
|||||
|
Power requirement |
Three-phase, 380±10% VAC, 50/60Hz |
|||||
|
Power consumption |
1.5kW |
5kW |
5.5kW |
|||
|
Weight (kg) |
1200 |
1500 |
2000 |
|||