Battery Pack Short Circuit Tester
External short circuit tests simulate incorrect battery usage. These tests consist of short circuiting a battery from outside to simulate use that may cause fire or rupture. The battery's positive and negative terminals are connected to an external resistor, and the battery is observed to check for fire or rupturing.
FEATURES
- The Battery Pack Short Circuit Tester has three relatively independent control modes: remote PC+ on-site touch screen + remote control. Parameters such as current, voltage and temperature are displayed
- There are total voltage, cell voltage, temperature, data curve, etc. records
- High current short circuit switch power is energy saving with double protection system, intelligent temperature protection and rust prevention
- All control parameter settings, data acquisition and video recording can be operated by a computer within a distance of >30m
- The equipment can be tested with domestic and foreign standards such as GB31241, GB/T31485, GB/T314673, IEC62660-2018.
STANDARD FEATURES
|
Model |
HD-H201-1 |
|
|
External dimension(W*D*H) |
780*880*1400mm |
|
|
Short circuit way |
Ambient temperature |
|
|
Short circuit current |
16000A |
|
|
Control cabinet internal resistance |
<1mΩ |
|
|
Resistance box (optional) |
Resistance range |
5-100mΩ adjustable |
|
External dimension |
1600W*1500D*1800Hmm |
|
|
Control way |
Touch screen + remote PC control |
|
|
Current |
Precision |
±0.5%FS |
|
Sampling period |
0.1-100ms |
|
|
Power supply |
AC220V |
|
|
Arc extinguishing device |
Vacuum arc extinguishing (high current short circuit switch) |
|
|
300,000 times |
||
|
Electrical life |
Resistive load 50,000 times |
|
|
Heat dissipation method |
Air cooled |
|
|
Observation port |
Have |
|
|
Voltage acquisition |
Voltage |
0-10V; 0-100V; 0-1000V |
|
Number of channels |
Standard 8 Road (according to customer needs) |
|
|
Precision |
0-10V: 0.15%F5; 0-100V: 0.3%FS; 0-1000V: 0.3%FS; |
|
|
Temperature collection |
Temperature range |
0-1300℃ |
|
Number of channels |
Standard 8 Road (according to customer needs) |
|
|
Precision |
±2.5℃ |
|
Risk Disclaimer for Supplying Battery Testing Equipment
Battery testing involves inherent risks and can be hazardous. All testing equipment should only be operated by qualified and trained personnel who understand the risks involved and how to mitigate them. Before operating, it is important to read and understand the manufacturer's instructions and safety guidelines. Failure to do so could result in serious injury or death.
By operating the battery test equipment, you acknowledge that you understand and assume the risks involved in battery testing, including but not limited to: electric shock, moving parts, heat, fire, noise, chemicals, explosion and other potential hazards. You also acknowledge that you are responsible for wearing appropriate safety equipment, such as protective clothing, helmets, goggles, earplugs, and gloves.
You understand that the use of battery test equipment may result in injury, disability, or death, and that you release the manufacturer, seller, and any related parties from any and all liability for any damages or injuries that may occur as a result of operating the equipment.
By operating battery test equipment, you acknowledge that you have read and understand this risk disclaimer and that you assume all risks associated with operating the equipment.
If you have any questions or concerns regarding the operation of the equipment, please consult with a qualified professional before use.
Thank you for your attention to this important safety information.